Maintenance tips for showerhead faucets
- Date:2023-09-27
- Read:1109
Due to the electroplating process used in shower showerheads, they differ from other bathroom products in terms of maintenance methods. Due to water quality and environmental factors, a certain amount of scale and impurities may accumulate inside the showerhead, which may affect your bathing comfort and even have a destructive effect on the showerhead. The maintenance of shower components is a problem that can be easily overlooked, especially the maintenance of the top spray of the shower. Therefore, it is important to pay attention to appropriate maintenance and upkeep of the product. Below is a detailed introduction to the maintenance of the top spray of the shower, allowing you to enjoy your shower.
Precautions and maintenance for shower head spray:
1. To ensure the durability of the product, please operate it as gently and slowly as possible.
2. After a long period of use, if it is found that the shower water splashes out irregularly and intermittently, there may be debris blocking the water outlet. At this time, just gently touch the soft glue at the shower outlet with your hand, and small debris will automatically replenish water and flush out.
3. Do not use strong acid when removing scale to avoid corrosion on the surface of the showerhead.
4. The heating water side of the faucet is in a high temperature state. Please be careful not to let your skin directly contact the surface to avoid burns.
5. Do not use cleaning powder. Polishing powder or other particle containing detergents or nylon are used for brushing.
6. Due to the fact that acidic detergents can corrode the electroplating layer, they should not be used during cleaning; If using acid to wash ceramic tiles, immediately rinse the shower and wipe it clean with a soft cloth.
7. When the faucet is very dirty, first wipe it clean with a moderately diluted neutral washing soft cloth, and then rinse it with clean water to prevent stains from appearing on the faucet.
8. When cosmetics and laundry detergent adhere, the electroplated surface will lose its luster. Please wash thoroughly and dry the faucet with a soft cloth to ensure it looks brand new.
9. When you do not use the faucet for a long time, please close the main inlet valve of your home.
10. When the ambient temperature is below 0 ° C, please take necessary heating measures for the water equipment in your home in a timely manner.
11. The usage environment of the showerhead should not exceed 70 degrees Celsius. High temperature and ultraviolet light can greatly accelerate the aging of the showerhead and shorten its service life. Therefore, the installation of the showerhead should be as far away as possible from electrical heat sources such as bathroom heaters. The shower should not be installed directly below the bathroom heater, and the distance should be at least 60CM.
12. The metal hose of the showerhead should be kept in a naturally stretched state, and should not be coiled around the faucet when not in use. At the same time, be careful not to form a dead angle at the joint between the hose and the faucet to avoid breaking or damaging the hose.
13. Regularly inspect the water supply and drainage hoses, and replace them immediately if cracks are found, in order to ensure that it does not affect the service life of the faucet.
PREVWhat are the precautions for purchasing a faucet in the kitchen?
NEXTThe Four Characteristics of New Sanitary Wares for Bathroom New Products